Charateristics:
A.Automatic PLC control, touch screen operations, humanized control interface
makes the operation and parameter setting simpler and faster, and
has error prompt and self-diagnosis functions.
B. PLC automatic control, touch screen operations, humanized control
interface makes the operation and parameter setting simpler and
faster, and has error prompt and self-diagnosis functionsWhen the wrapping paper skin is used up, it will stop itself and
alarm (the touch screen shows the reason for alarm).
C. The packing bags seal adopts the principle of heating and
pressing. The heating temperature of horizontal seal and vertical
seal can be adjusted independently and the temperature can be
displayed in real time
D. The speed is set by the operator, and the number of qualified
products on shifts and the total output on shifts are visually
displayed on the touch screen;
E. On the control panel, there is an on-off button of compressed
air, and the machine will stop automatically when the air pressure
is lower than the minimum set pressure, and the fault cause will be
displayed;
F. Safety system: The machine is equipped with a safety door. Open
the safety door and the machine will stop automatically (set); At
the same time, the machine is equipped with an emergency stop
button to ensure the safety of the operator.
G. Simple maintenance: Simple structure design, low failure rate,
less wearing parts, convenient maintenance.
H. of cleaning: The machine is designed with the convenience of
cleaning fully considered. All parts in contact with the materials
to be packed can be removed quickly, installed quickly, and swabbed
especially convenient;
.
| Packing speed: | 30-120bag/min |
| Bag-making size : | (L)80-300mm (W)80-200mm |
| Metering range: | 100mL (maximum) |
| The maximum packaging film | width is 400mm |
| The film thickness : | 0.04-0.09mm |
| Gas consumption: | 0.8 Mps 0.6m3/min |
| Total power/voltage: | 3.0kW 220V 50HZ |
| Dimensions: | L1450mm*W1100mm*H1600mm |
| The weight: | 520kg |
| |
Bag samples:
Workshop
Installation
The initial installation is NOT included with the professional ROTY team member. All installation with the ROTY team must be scheduled at least 4 weeks in advance before actual
trip taken. All necessary connectivity must be ready prior the
service being scheduled.
While ROTY team member arrives at the site for a complete and final
installation, two days training course will be provide to the
customer for operation and maintenance procedure. The initial
installation is provided within 5 working days excluding travel days. The actual installation days may vary,
based on different machine mode and packing lines. Each day of
working hour consist at 8 working hours..
ROTY provide free parts and parts delivery, when manufacture defects has
been detected during normal operation (vulnerable parts not
included) under warranty period.
Warranty
All parts are under One Year Warranty with defects from manufacturer. Any other defect caused by human
error, mishandling, wear-and-tear & any foreseeable conditions will
not be covered by this warranty. All electronic parts and component
can be guaranteed by original part’s manufacturer or ROTY.
